Forklift repair details should also be noted to follow, with the increasing number of domestic forklift sales, forklift after-sales repair will also rise to a high point, but with the increasing number of competitors in the forklift repair and maintenance market, only to improve their own service quality to win the market, the following small knitting forklift repair process needs to pay attention to some details.

　　在叉车修理之前，要先从蓄电池上拆下搭铁线，以削减因短路而造成的导线损伤以及焚毁的事端;对车身、座椅和地板要做好保护措施，以防损坏和污染;因制动液和防冻液很简单损坏喷漆外表，故处理时有必要给予恰当的留意;为有效和可靠地进行叉车修理工作，有必要运用专用工具。

　　Before repairing forklift trucks, it is necessary to remove the wire from the storage battery to reduce the damage and burning caused by short circuit; to protect the body, seat and floor from damage and pollution; because brake fluid and antifreeze fluid are very simple to damage the spray paint appearance, it is necessary to pay proper attention to the treatment; to effectively and reliably repair forklift trucks, there are It is necessary to use special tools.

　　运用过的开口销、密封垫、O型圈、油封、锁紧垫圈和自锁螺母有必要报废，在复装时 应预备新的。

　　The used opening pins, sealing gaskets, O-rings, oil seals, locking gaskets and self-locking nuts need to be scrapped, and new ones should be prepared for re-assembly.

　　假如重复运用这些零件，则这些零件不能坚持正常的功用;为确保既准确又顺畅的复装工作，对拆卸的叉车零件要规整地分组保管，不能丢掉;在查看和重新安装之前，应当先清洗零件。此外，对油口等要用压缩空气吹洗洁净，承认这些部位确无堵塞。安装之前，对零件的旋转和滑动外表，必定要用机油或光滑脂光滑。

　　If these parts are used repeatedly, they can not maintain their normal functions; in order to ensure accurate and smooth duplication work, the disassembled forklift parts should be kept in a regular grouping and can not be thrown away; before viewing and re-installing, the parts should be cleaned first. In addition, compressed air should be used to clean the oil nozzles and other parts, admitting that there is no blockage in these parts. Before installation, the rotating and sliding appearance of the parts must be smooth with oil or smooth grease.

　　必要时，对密封垫应运用密封剂，避免走漏。

　　Sealants should be used for gaskets when necessary to avoid leakage.

　　当完毕修理工作后，必定要再次查看是不是准确进行了修理工作，并进行试运行叉车查看是不是能够正常工作。

　　When the repair work is finished, it is necessary to check again whether the repair work has been done accurately, and to test the operation of forklift truck to see if it can work properly.

　　以上内容由威尼斯官方网站登录厂家整理发布，更多相关资讯可以点击我们的官网进行咨询：

　　The above content is organized and published by Jinan Forklift Leasing Factory. More information can be consulted by clicking on our official website: .