Picking up goods by forklift can be summarized into eight actions:

1，接近堆栈。叉车启动后，根据堆放位置，将铲车驱动到堆栈前方停止。

1. Close to the stack. After the forklift is started, drive the forklift to the front of the stack to stop according to the stacking position.

2，立式桅杆。叉车停止后，将杠杆置于中立位置，向前推动倾斜杆，将桅杆恢复到垂直位置。

2. Vertical mast. After the forklift stops, put the lever in the neutral position and push the tilt rod forward to return the mast to the vertical position.

3，调整叉高。拉动操纵杆抬起叉子，使叉叉在货物下方的货物上间隙或托盘叉。

3. Adjust the fork height. Pull the lever to lift the fork so that the fork is on the cargo gap or pallet fork under the cargo.

4，叉入商品。将变速杆移动到前进档中，叉车缓慢向前推，使叉子进入货物间隙或托盘叉。当叉臂接触货物时，叉车被制动。

4. Fork in goods. Move the shift lever to the forward gear, and slowly push the forklift forward to make the fork enter the cargo gap or pallet fork. When the fork arm contacts the goods, the forklift is braked.

5，小提叉叉。向下拉杆，将叉抬高到叉车的高度。

5. Small lifting fork. Pull down the pull rod and raise the fork to the height of the forklift.

6，倒桅杆 向后拉动操纵杆，使桅杆升至合适位置。

6. Reverse the mast and pull the control lever backward to raise the mast to the appropriate position.

7，退货。换挡杆挂回一块，缓刹车，叉车回货可跌倒位置。

7. Return. Put the shift lever back on one piece, slow the brake, and the forklift can fall down when returning goods.

8，调整叉高。向前推动操纵杆，将叉子离开地面200-300mm高度。开始向后，前往送货地点。

8. Adjust the fork height. Push the lever forward and lift the fork 200-300mm off the ground. Start back and go to the delivery point.

本文的精彩内容由济南8040网站威尼斯提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：我们有专门的客服为您解答问题

The wonderful content of this article is provided by Jinan second-hand forklift. There are many wonderful content on this website. You can click to enter more content: We have special customer service to answer your questions