全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-新闻动态-必看叉车培训操作技巧,涨知识

必看叉车培训操作技巧,涨知识

来源:/ 日期:2021-12-21 发布人:hangong

叉车是工业搬运车辆,是指对成件托盘货物进行装卸、堆垛和短距离运输作业的各种轮式搬运车辆。国际标准化组织ISO/TC110称为工业车辆。常用于仓储大型物件的运输,通常使用燃油机或者电池驱动。

Forklift is an industrial handling vehicle, which refers to various wheeled handling vehicles for loading, unloading, stacking and short-distance transportation of packaged pallet goods. International Organization for Standardization ISO / TC110 is called industrial vehicle. It is often used for the transportation of large objects in storage, usually driven by fuel engine or battery.
叉车?
Forklift?
1、运行前要检查刹车系统电池电量是不是充足,如发现缺陷就在运行前处理完善后再操作
1. Before operation, check whether the battery power of the braking system is sufficient. If defects are found, handle them before operation
2、搬运货物时不允许用单个货叉运转货物,也不允许用货叉尖部去挑起货物,是货叉的全部插入货物下面并使货物均匀地放在货叉上
2. When handling the goods, it is not allowed to use a single fork to move the goods, nor is it allowed to use the tip of the fork to lift the goods. All the forks are inserted under the goods and the goods are evenly placed on the fork
3、平稳起步,转向前一定要先减速,正常行驶速度不要过快,平稳制动停车
3. Start smoothly, slow down before turning, don't drive too fast at normal speed, brake and stop smoothly
4、不准在货叉上站人,叉车上不准载人运行
4. No one is allowed to stand on the fork and no one is allowed to run on the forklift
5、对于尺寸较大的货物要小心搬运,不要搬运未固定或松散的货物
5. Handle the goods with large size carefully, and do not handle the goods that are not fixed or loose
6、定期检查电解液,禁止使用明火照明来检查电池电解液
6. Check the electrolyte regularly. Do not use open flame lighting to check the battery electrolyte
7、停车不用前,要将货叉下降着地并将叉车摆放整齐,停车并断开整车
7. Before parking, lower the forks to the ground, place the forklift neatly, stop and disconnect the whole vehicle
8、电源电量不足时,叉车的电量保护装置自动开启,叉车货叉将拒绝上升操作,禁止继续载货使用,此时应该空车驶到充电机位置给叉车充电。
8. When the power supply is insufficient, the power protection device of the forklift will turn on automatically, and the forklift fork will refuse to rise and cannot continue to carry goods. At this time, the empty vehicle should drive to the charger position to charge the forklift.
9、充电时,先断开叉车工作系统与电池的连接,再将电池与充电机连接,再连接充电机与电源插座,开启充电机。
9. When charging, first disconnect the forklift working system from the battery, then connect the battery to the charger, then connect the charger to the power socket, and turn on the charger.
10、通常情况下,智能型充电机无需要人工干预,非智能充电机,则可以人工干预充电机输出电压与电流值,通常电压输出值比电池标称电压高10即可,输出电流应该设定为电池额定容量的1/10左右。
10. Generally, the intelligent charger does not need manual intervention, and the non intelligent charger can manually intervene the charger output voltage and current value. Generally, the voltage output value is 10 higher than the nominal voltage of the battery, and the output current should be set to about 1 / 10 of the rated capacity of the battery.

8040网站威尼斯
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:/   备案号:鲁ICP备14018186号-1  技术支持:网站建设·推广运营

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

8040网站威尼斯_【唯一授权网站】