全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题-叉车出租内燃叉车未启动发动机前的检查方法?

叉车出租内燃叉车未启动发动机前的检查方法?

来源:/ 日期:2022-05-24 发布人:hangong

叉车出租内燃叉车未启动发动机前的检查方法?内燃叉车是指使用柴油,汽油或者液化石油气为燃料,由发动机提供动力的叉车。载重量为0.5吨——45吨。一般分为:平衡重式内燃叉车,集装箱叉车(正面吊),侧面叉车。

How to check the internal combustion forklift before starting the engine? Internal combustion forklift refers to a forklift that uses diesel, gasoline or liquefied petroleum gas as fuel and is powered by an engine. The load capacity is 0.5-45 tons. It is generally divided into: balance weight internal combustion forklift, container forklift (front crane), and side forklift.
(一)检查地面有无新滴下的油迹,寻找漏油部位,根据渗漏情况确定可否运行或检修;
(1) Check whether there is any newly dripping oil on the ground, look for the oil leakage part, and determine whether it can be operated or repaired according to the leakage;
(二)检查发动机的机油、冷却水、柴油、液压油、制动液是否足够,并注意油液的清洁度;
(2) Check whether the engine oil, cooling water, diesel, hydraulic oil and brake fluid are sufficient, and pay attention to the cleanliness of the oil;
(三)检查轮胎气压是否足够及磨损是否过量、轮辋有无裂纹、紧固螺栓是否紧固、齐全。
(3) Check whether the tire pressure is sufficient and whether the tire wear is excessive, whether the rim has cracks, and whether the fastening bolts are fastened and complete.
(四)检查转向系、制动系静态下是否符合要。
(4) Check whether the steering system and braking system meet the requirements under static state.
转向液压油管无老化破损,固定稳当、不与转向轮或其它机件相碰擦左、右转向轮的状态目测平行直立于地面达到制动力时拉过的齿数d7齿拉足时手刹杆的操作力1500~330N制动踏板自由行程8~15mm达到*大制动力时的踏板行程一脚即可达到*大制动力且不超过全行程的4/5*大制动力(即非助力制动系统为踏板不下移,助力制动系统为踏板不反弹或不下移)保持时间~lmin;
The steering hydraulic oil pipe shall be free of aging and damage, and shall be firmly fixed without collision with the steering wheel or other parts Visually check the status of the right steering wheel. The number of teeth pulled when the braking force is reached. D7. The operating force of the hand brake lever when the teeth are fully pulled is 1500 ~ 330n. The free travel of the brake pedal is 8~15mm. When the pedal travel reaches * the pedal travel at large braking force, one foot can reach * the large braking force and does not exceed 4/5 of the full travel. The holding time of the large braking force (that is, the pedal does not move down for non power assisted braking system, and the pedal does not rebound or move down for power assisted braking system) is ~lmin;
(五)检查风扇叶片有无裂纹,皮带的紧度是否合适;
(5) Check whether the fan blade has cracks and whether the belt tightness is appropriate;
(六)检查车灯(大小灯、转向灯、制动灯)、喇叭是否正常。
(6) Check whether the lights (large and small lights, steering lights, brake lights) and horn are normal.
本文的精彩内容由济南8040网站威尼斯提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入我们有专门的客服为您解答问题
The wonderful content of this article is provided by Jinan second-hand forklift. There are many wonderful content on this website. You can click to enter more content We have special customer service to answer your questions

8040网站威尼斯
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:/   备案号:鲁ICP备14018186号-1  技术支持:网站建设·推广运营

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

8040网站威尼斯_【唯一授权网站】