避免叉车油温过高需要注意什么
来源:https://www.jnhgjx.net/ 日期:2022-05-16 发布人:
叉车油温过高可能会导致设备出现问题,那么,如何避免叉车油温过高的使用注意什么?因此我们一定要注意以下事项:
High forklift oil temperature may cause equipment problems. How to avoid high forklift oil temperature? What should be paid attention to? Therefore, we must pay attention to the following matters:
1、保持叉车油箱中的油量正常,以便系统中有足够的油用于循环冷却。
1. Keep the oil quantity in the forklift oil tank normal so that there is enough oil in the system for circulating cooling.
2、当叉车的执行器不工作时,应及时卸载系统。
2. When the actuator of the forklift does not work, the system shall be unloaded in time.
3、经常清洁叉车的冷却装置,以使其保持良好的工作状态。
3. Always clean the cooling device of forklift truck to keep it in good working condition.
4、应根据叉车的工作环境温度合理选择液压油,环境温度较高时应选择高粘度油,环境温度较低时应选择低粘度油。
4. The hydraulic oil shall be reasonably selected according to the working ambient temperature of the forklift. The high viscosity oil shall be selected when the ambient temperature is high, and the low viscosity oil shall be selected when the ambient temperature is low.
5、叉车的工作环境温度高于30℃时,搅拌桶叉车的连续运行时间不能超过4小时。
5. When the working environment temperature of the forklift is higher than 30 ℃, the continuous operation time of the mixing bucket forklift shall not exceed 4 hours.
6、当叉车的工作环境温度低于10℃时,系统应在空载条件下运行20分钟,然后在油温升至规定值后才能工作。
6. When the working environment temperature of the forklift is lower than 10 ℃, the system shall run for 20 minutes under no-load condition, and then it can work only after the oil temperature rises to the specified value.
本文的精彩内容由
威尼斯官方网站登录提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入
我们有专门的客服为您解答问题
The wonderful content of this article is provided by Jinan forklift leasing. There are many wonderful content on this website. You can click to enter more content We have special customer service to answer your questions