全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题电动叉车作业时噪音大的缘由?

电动叉车作业时噪音大的缘由?

来源:https://www.jnhgjx.net/ 日期:2021-06-05 发布人:

在电动叉车的使用中,咱们可能会发现这样的疑问,电动叉车在作业时会发生格外大的噪音,是什么缘由致使这一结果呢?我们来看下电动叉车噪音过大缘由剖析:

In the use of electric forklift, we may find such a question, electric forklift in the operation will produce extra loud noise, what is the reason for this result? Let's take a look at the causes of excessive noise of electric forklift
1、紧固件松动,车体导轮和滚轮,当磨损严峻,空隙很大。
1. The fastener is loose, the car body guide wheel and roller, when the wear is severe, the gap is large.
2、链条与链片销轴磨损空隙过大或者是货叉上、下卡钉与叉架横梁空隙过大。
2. The wear gap between the chain and the pin shaft of the chain piece is too large, or the gap between the upper and lower pins of the fork and the cross beam of the fork frame is too large.
              威尼斯官方网站登录
3、查看导轮、滚轮与门架的冲突翻滚空隙是不是过大。货叉与叉架横梁间的合作空隙是不是过大,这些因素都会致使叉车在使用时发生较大的噪音。
3. Check whether the collision rolling gap between guide wheel, roller and gantry is too large. Whether the cooperation gap between the fork and the cross beam of the fork frame is too large or not, these factors will cause the forklift to produce greater noise in use.
叉车差生噪音的缘由是十分多的,作业人员应当将叉车开到停车场设施里面进行专项的排查开查找缘由,这样才能从本源上解决叉车噪音大的疑问。
There are many reasons for forklift's poor noise. Operators should drive forklift to the parking facilities for special investigation to find out the reasons, so as to solve the problem of forklift's high noise from the source.

8040网站威尼斯
地址:山东省济南市章丘区龙山街道济青路龙山段南侧1幢   电话:15953195999
网站:https://www.jnhgjx.net/   备案号:鲁ICP备14018186号-1  

鲁公网安备 37011202000702号

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

8040网站威尼斯_【唯一授权网站】